日本で需要があるのに日本で買うことが難しいBURNDYの商品（以下、型番参照）があります。
輸入代行（購入代行）「かけ橋」を利用することで、これらの商品を入手できる可能性が高まります。
なお、このサイトに掲載していない型番もお探しすることができます。
お気軽にご相談いただければと思います。
＊取引の大まかな流れ
「お問合わせ → 御見積りご提示 → ご入金後、海外からお取り寄せ → 日本国内へお届け」
かけ橋の特長
- 「2,600件以上の豊富な輸入実績」
- 「Amazonのお客様評価100％が肯定的」
BURNDYの概要
本社をニューハンプシャー州マンチェスターに置くBURNDY®は、米国に2か所、メキシコに1か所の製造拠点を有しています。卓越したカスタマーサービス、業界最高品質の製品、そして継続的な技術革新は、BURNDY®が提供する誇りとするものです。あらゆるコネクタニーズに対応する幅広い工具群と、あらゆる電力ニーズを満たす電気コネクタを揃えています。優れた製造技術と高度なエンジニアリングサポートチームにより、BURNDY®はお客様のためのあらゆるカスタムコネクタを設計・製造可能です。サービスと製品の両面で95年以上にわたり顧客サポートに専念してきた実績から、コネクタに関するあらゆるニーズにお応えできるのはBURNDY®だけです。（BURNDYホームページより引用）
Clamps（クランプ）
| 商品タイトル | Catalog ID | 簡易補足 |
|---|---|---|
| GAR6429, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR6429 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3/8″ Pipe, 5/8″-3/4″ Rod, #5-#6 Rebar, Bright Dipped |
| GAR6426, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR6426 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Pipe, 5/8″-3/4″ Rod, #5-#6 Rebar, Bright Dipped |
| GC18A, Mechanical Grounding Connector, Cable to Water Pipe, #6-250 kcmil, 1-1/4″-2″ Pipe, Al/Cu Rated | GC18A | Mechanical Grounding Connector, Cable to Water Pipe, 6 AWG – 250 kcmil, 1-1/4″ – 2″ Pipe, Al/Cu Rated |
| GC22A, Mechanical Grounding Connector, Cable to Water Pipe, #6-250, 2-1/2″-4″, Al/Cu Rated | GC22A | Mechanical Grounding Connector, Cable to Water Pipe, 6 AWG – 250 kcmil, 2-1/2″ – 4″ Pipe, Al/Cu Rated |
| GB29, Mechanical Grounding Connector, Cable to Bar | GB29 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, 2 IN Width |
| C11D, Cast Bronze Ground Clamp, Cable to Water Pipe, Tube or Rebar | C11D | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 1/2″- 1″ Water Pipe, #4 – #8 Rebar |
| C11N, Cast Bronze Ground Clamp, Cable to Water Pipe or Tube | C11N | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 1/2″- 1″ Water Pipe, pipe clamp:50 in-lb |
| C11K16D, Cast Bronze Ground Clamp for Water Pipe, Rebar, Ground Rod, to Tap Conductor | C11K16D | Cast Bronze Ground Clamps, Water Pipe-1/2 ” – 1 “(13 -25) (Run), Rebar-#4 -#6 (Run ), Ground Rod -3/8″-1” (Run), Ground-#10-#2 Str. (Tap) |
| GC15A, Mechanical Grounding Connector, Cable to Water Pipe, #14-1/0 AWG, 1/2″-1″ Pipe, Al/Cu Rated | GC15A | Mechanical Ground Connector; Cable to Water Pipe |
| GAR1826, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1826 | Ground Clamp Copper 4 AWG-2/0 AWG Installation Torque Recommended Run in-lb240 LB in |
| C22, Cast Bronze Ground Clamp, Cable to Pipe or Tube | C22 | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 1-1/4″ – 2″ Water Pipe |
| GB26, Mechanical Grounding Connector, Cable to Bar | GB26 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud, 1-1/2 IN Width |
| GAR3903BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3903BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 1-1/4″-2″ Pipe, 3/8″ Stud |
| GAR3906, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3906 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 6″ Pipe, 3/8″ Stud |
| C4, Cast Bronze Ground Clamp, Cable to Water Pipe or Tube | C4 | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 2-1/2″- 4″ Water Pipe |
| GAR3905, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3905 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 4″ – 5″ Pipe, 3/8″ Stud |
| GAR1829, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1829 | Ground Clamp Copper 2/0 AWG-250 Kcmil Installation Torque Recommended Run in-lb240 LB in |
| GAR3904, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3904 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 2-1/2″ – 3-1/2″ Pipe , 3/8″ Stud |
| GAR3904BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3904BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 2-1/2″-3-1/2″ Pipe, 3/8″ Stud |
| GAR1929, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1929 | Ground Clamp Copper 2/0 AWG-250 kcmil Installation Torque Recommended Run in-lb240 LB in |
| GK6429, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK6429 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3/8″ Pipe, 5/8″-3/4″ Rod |
| GAR1726, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1726 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 1-1/2″ Pipe, 1-5/8″-1-7/8″ Rod, Bright Dipped |
| GAR3903, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3903 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 1-1/4″ – 2″ Pipe, 3/8″ Stud |
| C22D, Cast Bronze Ground Clamp, Cable to Pipe or Tube | C22D | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 1-1/4″ – 2″ Water Pipe |
| C11HD4/0DB, Cast Bronze Ground Clamp for Water Pipe, Rebar, Ground Rod to Tap Conductor | C11HD4/0DB | Cast Bronze Ground Clamp for Water Pipe/Rebar/Ground Rod |
| GC2626CT, Mechanical Grounding Connector, One to Two Cables to Bar | GC2626CT | Mechanical Cable Tray Ground Clamp |
| GAR1426, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1426 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), #7 – #8 Rebar, 7/8″ to 1 ” Rod, 1/2″ – 3/4″ Pipe, Bright Dipped |
| GAR2226, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2226 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 4″ Pipe, 4″-4-1/2″ Rod, Bright Dipped |
| GAR3907, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3907 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 8″ Pipe, 3/8″ Stud |
| KVS28, 2-piece OKLIP Service Connector for heavy duty applications | KVS28 | 2-Piece OKLIP™ mechanical connector with neoprene rings to hold bolts in place during installation. |
| GAR1926, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1926 | Ground Clamp Copper 4 AWG-2/0 AWG Installation Torque Recommended Run in-lb240 LB in |
| GAR1429, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1429 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 1/2″-3/4″ Pipe, 7/8″-1″ Rod, #7-#8 Rebar, Bright Dipped |
| GP6429, Mechanical Grounding Connector, 2 Cables to Rod or Pipe | GP6429 | Mechanical Grounding Connector; 2 Cables to Rod or Pipe |
| GAR3905BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3905BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 4″-5″ Pipe, 3/8″ Stud |
| GAR3902BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3902BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 1/2″-1″ Pipe, 3/8″ Stud, 3.25 IN Width |
| GAR2229, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2229 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 4″ Pipe, 4″-4-1/2″ Rod, Bright Dipped |
| GBM29, Mechanical Grounding Connector, Cable to Bar | GBM29 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud |
| GAR2026, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2026 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 3″ Pipe, 3″-3-1/2″ Rod, Bright Dipped |
| GBM26, Mechanical Grounding Connector, Cable to Bar | GBM26 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud. |
| UCG25RS, Aluminum Alloy Parallel Clamp | UCG25RS | Multiple purpose parallel groove clamp made of high strength, high conductivity aluminum alloy. Hardware allows for one of two wrench installation,length:1-3/8″,width:1-5/8″. |
| GAR1729, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1729 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 1-1/2″ Pipe, 1-5/8″-1-7/8″ Rod, Bright Dipped |
| GAR2129, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2129 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3-1/2″ Pipe, 3-1/2″-4″ Rod, Bright Dipped |
| C5, Bronze Ground Clamp, Cable to Water Pipe | C5 | 1/2-1IN JUNIOR BARE |
| GAR1626, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1626 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 1-1/4″ Pipe, 1-3/8″-1-1/2″ Rod, #11 Rebar, Bright Dipped |
| GAR2029, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2029 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3″ Pipe, 3″-3-1/2″ Rod, Bright Dipped |
| CZ11, Grounding Clamp, Cable to Water Pipe | CZ11 | Grounding Clamp, Cable to Water Pipe, 10 – 2 AWG, 1/2″ – 1″ Water Pipe, W/ zinc plated screws |
| KVSU34, Mechanical Connector with Spacer Bar | KVSU34 | Spacer bar to separate dissimilar conductors; long contact length; mechanical connector |
| GAR3904TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3904TC | Water Pipe Ground Connector, 2-1/2″- 3-1/2″ Rod, Large, smooth connector contact area between pipe and ground clamp |
| GIE2CG3, Mechanical Grounding Connector for Flexible Rubber Sheath Cable, 6-2 AWG | GIE2CG3 | Mechanical Grounding Connector, For Flexible Rubber Sheath Cable, 6 AWG – 2 AWG |
| KVSU28, Mechanical Connector with Spacer Bar | KVSU28 | Tin plated copper alloy with tin plated hardware; spacer bar to separate dissimilar conductors |
| GAR3903TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3903TC | Water Pipe Ground Connector, 1-1/4″ – 2″ Rod, Large, smooth connector contact area between pipe and ground clamp |
| BTCGC250, Mechanical Ground Clamp for Cable Tray | BTCGC250 | TRAY CLAMP 250 KCMIL – 6, Material Aluminum, Tin plated finish, Zinc-Plated Steel Screws |
| GAR1526, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1526 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), #9 – #10 Rebar, 1-1 /8″ to 1-1/4″ Rod, 1″ Pipe, Bright Dipped |
| C8, Cast Bronze Ground Clamp, Cable to Water Pipe or Tube | C8 | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 4-1/2″ – 6″ Water Pipe |
| GAR3902, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3902 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 1/2″-1″ Pipe, 3/8″ Stud |
| GK6426, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK6426 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG ( Str.), 3/8″ Pipe, 5/8″ – 3/4″ Rod, 3/8″ Stud |
| KVS26, 2-piece OKLIP Service Connector for heavy duty applications | KVS26 | Compact 2-piece, high strength, copper alloy with neoprene rings |
| GIE4CG3, Beryllium Copper Grounding Connector, Heavy Duty for Vehicle Grounding | GIE4CG3 | Beryllium Copper Grounding Connector, Heavy Duty, For Vehicle Grounding |
| UCTCOVER, Polyethylene Cover | UCTCOVER | Polyethylene Cover for BURNDY® FASTAP™ Clamps and select UCG Series Connectors |
| GAR184C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR184C | Ground Clamp Copper 8 AWG-4 AWG Installation Torque Recommended Run in-lb240 LB in |
| GAR1629, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1629 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 1-1/4″ Pipe, 1-3/8″-1-1/2″ Rod, #11 Rebar |
| C11B, Cast Bronze Ground Clamp, Cable to Water Pipe or Tube | C11B | Cast Bronze Ground Clamp, Cable to Water Pipe or Copper Tube, 10 – 2 AWG, 1/2″- 1″ Water Pipe |
| GB34, Mechanical Grounding Connector, Cable to Bar | GB34 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-3/8 IN Width |
| GAR1529, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1529 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 1″ Pipe, 1-1/8″-1-1/4″ Rod, #9-#10 Rebar, Bright Dipped |
| GAR3906BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3906BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 1/2″-1″ Pipe, 3/8″ Stud, 8.62 IN Width |
| GB4C, Mechanical Grounding Connector, Cable to Bar | GB4C | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Stud1-1/4 IN Width |
| GAR8629, Mechanical Grounding Connector, Cable to Rod or Pipe, IEEE 837 | GAR8629 | GAR – Mechanical Grounding Connector, Cable to Rod, Fence Post or Pipe, 1 Parallel or Perpendicular Cable |
| GAR644C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR644C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Pipe, 5/8″-3/4″ Rod, #5-#6 Rebar, Bright Dipped |
| GAR2126, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2126 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 3-1/2″ to 4″ Rod, 3-1/2″ Pipe, Bright Dipped |
| GKA4C, Copper, Direct Burial Ground Terminal | GKA4C | Copper Alloy Direct Burial Terminal, #14 Sol. – #4 Str., 1.13 in L |
| GX2929, Mechanical Grounding Connector, Cable Cross Connection | GX2929 | Mechanical Grounding Connector, Cable Cross Connection, 2/0 AWG (Sol.) – 250 kcmil ( Run), 2/0 AWG (Sol.) – 250 kcmil ( Tap), 3/8″ Stud |
| GBM4C, Mechanical Grounding Connector, Cable to Bar | GBM4C | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Stud |
| KVSW28, Mechanical Connector with Spacer Bar | KVSW28 | Mechanical Connector For CUWeld and Copper Supplied with a CU alloy Spacer that seperates run and tap conductors, Run: 1/0 str. – 4/0 str., Tap: 6 sol. – 4/0 str. |
| KVSU31, Mechanical Connector with Spacer Bar | KVSU31 | Tin plated copper alloy with tin plated hardware; spacer bar to separate dissimilar conductors |
| GAR3908, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3908 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 10″ Pipe, 3/8″ Stud |
| KVSU44, Mechanical Connector with Spacer Bar | KVSU44 | Tin plated copper alloy with tin plated hardware; spacer bar to separate dissimilar conductors |
| UC4W28, Copper Parallel Groove Clamp | UC4W28 | CU Parallel Groove Clamp accommodates large number of CU Conductors, Conductor: 4 Sol. – 4/0 Str. (Either Groove) |
| KVSU26, Mechanical Connector with Spacer Bar | KVSU26 | Tin plated copper alloy with tin plated hardware; spacer bar to separate dissimilar conductors |
| GB29T4, Mechanical Grounding Connector, Cable to Bar | GB29T4 | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud |
| KVSU40, Mechanical Connector with Spacer Bar | KVSU40 | Tin plated copper alloy with tin plated hardware; spacer bar to separate dissimilar conductors |
| KVS44, 2-piece OKLIP Service Connector for heavy duty applications | KVS44 | Compact 2-piece, high strength, copper alloy with neoprene rings |
| GAR174C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR174C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), 1-5 /8″ to 1-7/8″ Rod, 1-1/2″ Pipe, Bright Dipped |
| C11K17D, Cast Bronze Ground Clamp with Lay-in Feature, for Water Pipe, Rebar, Ground Rod, to Tap Conductor | C11K17D | Cast Bronze Ground Clamp w/Lay-in Feature, 1/2″-1″ Water Pipe, #4-#6 Rebar, 3/8″-1″ Ground Rod(Main), #10 Sol-#2 Str Ground, Silicon Bronze H/W |
| UC8W26L, Cast Copper Alloy Universal Parallel Clamp, Tin Plated | UC8W26L | Cast Copper Alloy Universal Parallel Clamp, 8 Sol. – 2/0 Str, 1 in Length, 1-7/16 in Width, Tin-plated |
| C11CSH2, Cast Bronze Clamp with Copper Strap, Cable to Water Pipe | C11CSH2 | Cast Bronze Clamp with Copper Strap, Cable to Water Pipe, 4/0 AWG (Str.), 1/2″- 1″ Water Pipe, 3/4″ hub |
| GAR3905TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3905TC | Water Pipe Ground Connector, 4″- 5″ Rod, Large, smooth connector contact area between pipe and ground clamp |
| GXP1828RF, Cast Copper Alloy Raised Floor Ground Connector, #6 Sol-4/0 Str | GXP1828RF | Cast Copper Alloy Raised Floor Ground Connector, #6 Sol.-4/0 Str., 4.53 in L, 3.94 in W |
| UC28RS, Cast Aluminum Alloy Tap Connector | UC28RS | Cast Aluminum Alloy TAPIT™, 1/0 (Str.) AWG-4/0 (Str.) AWG AL & CU (Groove A), 1/0 AWG-4/0 AWG ACSR, AAAC, 5005(Groove A), 8 (SOL.) AWG-1/0 (Str.) AWG AL & CU (Groove B), 6 AWG-1/0 AWG ACSR, AAAC, 5005 (Groove B) |
| C22HD4/0DB, Cast Bronze Ground Clamp for Water Pipe to Tap Conductor | C22HD4/0DB | Cast Bronze ground Clamps, 3.60 in L, 1-1/4″- 2″ Water Pipe (Run), #8 – 4/0 Ground (Tap) |
| KVS40, 2-piece OKLIP Service Connector for heavy duty applications | KVS40 | Compact 2-piece, high strength, copper alloy with neoprene rings |
| UCG25R, Parallel Groove Clamp, Aluminum | UCG25R | Multiple purpose parallel groove clamp made of high strength, high conductivity aluminum alloy. Hardware allows for one of two wrench installation,torque:150 in lbs. |
| C6, Cast Bronze Clamp, Armored Cable to Water Pipe | C6 | Cast Bronze Clamp, Armored Cable to Water Pipe, 10 AWG – 2 AWG (Str.), 1/2″ -1″ Water Pipe,pipe clamp:50 in-lb |
| C11CSH1, Cast Bronze Clamp with Copper Strap, Cable to Water Pipe | C11CSH1 | Cast Bronze Clamp with Copper Strap, Cable to Water Pipe, 6 AWG (Sol.), 1/2″ – 1″ Water Pipe, 1/2″ hub |
| GAR396925BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR396925BU | Mechanical Grounding Connector – Conductor to Water Pipe, #8 – 1/0 AWG; 2-1/2″ Pipe; UL/CSA; Rated for Direct Burial |
| GB29G69HEXT8, Mechanical Grounding Connector, Cable to Bar | GB29G69HEXT8 | Mechanical Grounding Connector, Cable to 1″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, 1.5 IN Width. |
| KVSW31, Mechanical Connector with Spacer Bar | KVSW31 | Mechanical Connector For CUWeld and Copper Supplied with a CU alloy Spacer that seperates run and tap conductors, Run: 250 – 350 kcmil, Tap: 4 sol. – 350 kcmil |
| GAR1126, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1126 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 1/2″ Rod, 1/4″ Pipe, Bright Dipped |
| C11LH3, Cast Bronze Clamp, Cable to Water Pipe | C11LH3 | Cast Bronze Clamp, Cable to Water Pipe, 3/0 AWG – 10 AWG, 1/2″ – 1″ Water Pipe, 1″ hub |
| GAR3907BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3907BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 8″ Pipe, 3/8″ Stud, 10.62 IN Width |
| GAR194C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR194C | Ground Clamp Copper 8 AWG-4 AWG Installation Torque Recommended Run in-lb240 LB in |
| C11LH2, Cast Bronze Clamp, Cable to Water Pipe | C11LH2 | Cast Bronze Clamp, Cable to Water Pipe, 2/0 AWG -10 AWG, 1/2″ – 1″ Water Pipe, 3/4″ hub |
| GAR3902TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3902TC | Mechanical Grounding Connector, For 2 Hole Lug to Water Pipe or Rod, 1/2″ – 1″ Pipe, 3/8″ Stud |
| GAR224C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR224C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), 4″ to 4-1/2″ Rod, 4″ Pipe, Bright Dipped |
| C11LH1, Cast Bronze Clamp, Cable to Water Pipe | C11LH1 | Cast Bronze Clamp, Cable to Water Pipe, 10 AWG -6 AWG, 1/2″ – 1″ Water Pipe, 1/2″ hub |
| GK1429, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1429 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Sol.) – 250 kcmil, 1/2″ – 3/4″ Pipe, 7/8′ – 1″ Rod, 1/2″ Stud |
| UC2W28L, Cast Copper Alloy Universal Parallel Clamp | UC2W28L | Cast Copper Alloy Universal Parallel Clamp, 2 Sol. – 4/0 Str, 1-1/8 Length, 1-3/4 in Width, Tin-plated |
| GIE4CG4, Stainless Steel Grounding Connector, Heavy Duty for Vehicle Grounding | GIE4CG4 | Stainless Steel Grounding Connector, Heavy Duty, For Vehicle Grounding |
| GAR6434, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR6434 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 kcmil – 500 kcmil, 3/8″ Pipe, 5/8″ – 3/4″ Rod, #5-#6 Rebar |
| GB26T4, Mechanical Grounding Connector, Cable to Bar | GB26T4 | Mechanical Grounding Connector, Cable to 1/2″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str) |
| GL2929, Mechanical Ground Connector, 2 Copper Cables to Bar | GL2929 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GBL30, Mechanical Grounding Connector, Cable to Bar | GBL30 | Cast Copper Alloy Ground Connector, 4 AWG (SOL) – 300 KCMIL, 1/2″ Stud, 1 1/2″ Width |
| GAR1129, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1129 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG ( Sol.) – 250 kcmil, 1/2″ Rod, 1/4″ Pipe, Bright Dipped |
| UC25R2RS, Aluminum Clamp | UC25R2RS | Cast Aluminum Alloy TAPIT™, 8 (SOL.) AWG-1/0 (Str.) AL & CU (Groove A), 6 AWG-1/0 AWG ACSR(Groove A), 8 (SOL.) AWG-2 (Str.) AWG AL & CU (Groove B), 6 AWG-2 AWG ACSR (Groove B) |
| KVSW44, Mechanical Connector with Spacer Bar | KVSW44 | Mechanical Connector For CUWeld and Copper Supplied with a CU alloy Spacer that seperates run and tap conductors, Run: 500-1000 Kcmil, Tap: 250-1000 Kcmil. |
| C11CSH3, Cast Bronze Clamp with Copper Strap, Cable to Water Pipe | C11CSH3 | Cast Bronze Clamp with Copper Strap, Cable to Water Pipe, 4/0 AWG (Str.), 1/2″- 1″ Water Pipe,1″ hub |
| GBM34, Mechanical Grounding Connector, Cable to Bar | GBM34 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud |
| GCG63T13G1, Bronze Ground Connector for Static Grounding Applications | GCB63T13G1 | Bronze Ground Connector, 2.28 in L |
| GAR3909, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3909 | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 12″ Pipe, 3/8″ Stud |
| C11CSLH12, Cast Bronze Clamp with Copper Strap, Cable to Water Pipe or Rebar | C11CSLH12 | Cast Bronze Ground Clamp w/Cu Strap, 1/2″-1″ Water Pipe, #4-#6 Rebar(Main), 1/2″ Hub, 2/0-#10 Ground, Zinc Plated H/W |
| UC2W30, Copper Parallel Groove Clamp | UC2W30 | CU Parallel Groove Clamp accommodates large number of CU Conductors, Conductor: 2 Sol. – 300 (Either Groove) |
| KVSW40, Mechanical Connector with Spacer Bar | KVSW40 | Mechanical Connector For CUWeld and Copper Supplied with a CU alloy Spacer that seperates run and tap conductors, Run: 400-800 Kcmil, Tap: 4/0 str. – 800 kcmil |
| GAR144C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR144C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), #7 – #8 Rebar, 7/8″ to 1 ” Rod, 1/2″ – 3/4″ Pipe, Bright Dipped |
| GBM29W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBM29W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud. Hot Tin Dipped |
| GB29T8, Mechanical Grounding Connector, Cable to Bar | GB29T8 | Mechanical Grounding Connector, Cable to 1/4″ – 1″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud |
| UC6W25CONKIT, Parallel Clamp Kit for Copper, includes UC Connector and Cover | UC6W25CONKIT | Parallel Clamp Kit for copper; included UC Connector and Cover |
| GAR3906TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3906TC | Water Pipe Ground Connector, 6″ Rod, Large, smooth connector contact area between pipe and ground clamp |
| GBM34W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBM34W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, Hot Tin Dipped |
| UCG32RS, Aluminum Alloy Parallel Clamp | UCG32RS | Multiple purpose parallel groove clamp, high conductivity aluminum alloy |
| GAR2234, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2234 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 – 500 kcmil, 4″ to 4-1/2″ Rod, 4″ Pipe, Bright Dipped |
| GAR2426, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2426 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 5″ Pipe, Bright Dipped. |
| GAR204C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR204C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), 3″ to 3-1/2″ Rod, 3″ Pipe, Bright Dipped |
| VG3, Copper Alloy Vise Connector, #2-#6 Sol | VG3 | Cu Alloy Vise Connectors, #2 – #6 Sol |
| GAR164C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR164C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), #11 Rebar, 1-3 /8″ to 1-1/2″ Rod, 1-1/4″ Pipe, Bright Dipped |
| GCS26HEX, CONSTRICTOR Ground Clamp to Steel Connector | GCS26HEX | Ground clamp to steel connector, Conductor range from #6 AWG to 2/0 AWG |
| KVS34A, 2-piece OKLIP Service Connector for heavy duty applications | KVS34A | Aluminum connector with spacer bar to separate dissimilar metals; for heavy duty applications; for use with copper and alumimun conductors |
| GL29G11, Mechanical Ground Connector, 2 Copper Cables to Bar | GL29G11 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| KVS44A, 2-piece OKLIP Service Connector for heavy duty applications | KVS44A | High-conductivity, non-copper bearing aluminum alloy connector. Spacer bar separates dissimilar conductors. Intended for heavy duty applications,conductor range,Run Cu and Al :500-1000. |
| GZ2612, Mechanical Grounding Connector, Copper Cable to Bar | GZ2612 | Mechanical Grounding Connector, For Copper Cable to Bar, 3 AWG (Str) – 2/0 (Str), 1/2″ Stud |
| GAR3907TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3907TC | Water pipe Ground Connector, 8″ I.P.S, 11.25 in W |
| GB29TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB29TN | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, Tin Plated |
| FFGC2/0, Fence Fabric Mechanical Ground Connector; 2/0 AWG | FFGC2/0 | Fence Fabric Grounding Connector |
| GAR2429, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2429 | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol.) – 250 kcmil, 5″ Pipe, Bright Dipped. |
| GAR154C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR154C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), #9 – #10 Rebar, 1-1 /8″ to 1-1/4″ Rod, 1″ Pipe, Bright Dipped |
| GAR1834, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1834 | Ground Clamp Copper 300 kcmil-500 kcmil Installation Torque Recommended Run in-lb480 LB in |
| GAR2034, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2034 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 – 500 kcmil, 3″ to 3-1/2″ Rod, 3″ Pipe, Bright Dipped |
| C7, Cast Bronze Clamp, Cable to Water Pipe | C7 | ARMWIRE 1-1/4 TO 2IN HUB |
| UCK1UL, Tin-Plated Cast Copper Alloy Interlocking-Finger Design Parallel Clamp | UCK1UL | Interlocking finger design accommodates large range of conductor sizes.Tin-plated, cast of high copper alloy and clamped with silicon bronze DURIUM bolt,wrench size:1/2. |
| GA400H294CTN, Mechancial Ground Connector for Copper Cable to 4″ Square Fence Post, Tin Plated | GA400H294CTN | Mechanical Ground Connector for Copper Cable to 4″ Square Fence Post |
| GZ2658, Mechanical Grounding Connector, Copper Cable to Bar | GZ2658 | Cast Cu Alloy Ground Clamp, Cable to Bar, #3 – 2/0 AWG Str, 5/8″ Bolt |
| UC33R, Cast Aluminum Clamp, Groove A: AL/CU 4/0 Str-400 kcmil ACSR; 3/0-336.4; Groove B: Al/Cu 6 Sol-2/0 Str, ACSR: 6-2/0 No inhibitor | UC33R | Cast Aluminum Alloy TAPIT™, GROOVE A, AL/CU: 4/0 STR – 400 kcmil, ACSR : 3/0 – 336.4 GROOVE B, AL/CU: 6 SOL – 2/0 STR ACSR : 6 – 2/0 |
| C22LH3, Cast Bronze Clamp, Cable to Water Pipe | C22LH3 | Cast Bronze Clamp,Cable to Water Pipe, 3/0 AWG – 10 AWG, 1-1/4″ – 2″ Water Pipe, 1″ hub |
| KVS31A, 2-piece OKLIP Service Connector for heavy duty applications, Run: 250-350 kcmil | KVS31A | Aluminum connector with spacer bar to separate dissimilar metals; for heavy duty applications; for use with copper and alumimun conductors |
| UC2834, Copper Parallel Groove Clamp | UC2834 | CU Parallel Groove Clamp accommodates large number of CU Conductors, Conductor: 4/0 Str. – 500 (Either Groove) |
| GAR1434, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1434 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 – 500 kcmil, #7 – #8 Rebar, 7/8″ to 1 ” Rod, 1/2″ – 3/4″ Pipe, Bright Dipped |
| GBM29T8, Mechanical Grounding Connector, Cable to Bar | GBM29T8 | Mechanical Grounding Connector; Cable to Bar |
| GAR1934, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1934 | Ground Clamp Copper 300 kcmil-500 kcmil Installation Torque Recommended Run in-lb480 LB in |
| GXW29C34, GROUNDWEJ Connector, Cable to Cable or Cable to Rod | GXW29C34 | GROUNDWEJ Connector |
| KVSW26, Mechanical Connector with Spacer Bar | KVSW26 | Mechanical Connector For CUWeld and Copper Supplied with a CU alloy Spacer that seperates run and tap conductors, Run: 2 str. – 2/0 str., Tap:6 sol. – 2/0 str. |
| GBM28CG2, Mechanical Grounding Connector, Cable to Bar | GBM28CG2 | Cable Tray Ground Clamp CU CABLE: #1 AWG (STR) – 4/0 AWG (STR) 1/4″ STUD TORQUE: 35 LB IN Tin Plated |
| C61, Cast Bronze Clamp, Cable to Water Pipe | C61 | Cast Bronze Clamp, Cable to Water Pipe, 6 AWG ( Sol.), 1/2″ – 1″ Water Pipe |
| GKA8C, Copper, Direct Burial Ground Terminal | GKA8C | Cu Direct Burial Ground Terminal, #10 AWG Sol-#8 AWG Str, #10 Hole Size, Stainless Steel H/W |
| GB34T3TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB34T3TN | Mechanical Grounding Connector, Cable to 0.63″ – 0.814″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, Tin – Plated |
| GB34T4, Mechanical Grounding Connector, Cable to Bar | GB34T4 | Mechanical Grounding Connector, Cable to 1/2″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-3/8 IN Width |
| UC32R, Parallel Groove Clamp Aluminum Alloy | UC32R | High strength aluminum alloy |
| KVS40A, 2-piece OKLIP Service Connector for heavy duty applications | KVS40A | Aluminum connector with spacer bar to separate dissimilar metals; for heavy duty applications; for use with copper and alumimun conductors |
| KVS28A, 2-piece OKLIP Service Connector for heavy duty applications, Run: Cu/Al, 1/0-4/0 Str | KVS28A | High-conductivity, non-copper bearing aluminum alloy connector. Spacer bar separates dissimilar conductors. Intended for heavy duty applications,conductor range,Run Cu and Al :1/0 str-4/0 str. |
| GB29G73, Mechanical Grounding Connector, Cable to Bar | GB29G73 | Mechanical Grounding Connector, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud |
| GB4CTN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB4CTN | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar; 8 AWG (Sol)- 4 AWG (Str); 3/8″ Stud; 1-1/4 IN Width; Tin Plated |
| GXW29C58, GROUNDWEJ Connector, Cable to Cable or Cable to Rod | GXW29C58 | GROUNDWEJ Connector |
| UCG32RSC, Aluminum Parallel Groove Clamp featuring LINEMAN ASSIST | UCT32RSC | BURNDY® FASTAP™ with LINEMAN ASSIST™ Aluminum Parallel Groove Clamp |
| GB29W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB29W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, Tin Hot Dipped |
| GK1426, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1426 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 1/2″ – 3/4″ Pipe, 7/8″ – 1″ Rod, 3/8″ Stud |
| KVSW28CG1, Mechanical Connector with Spacer Bar | KVSW28CG1 | Cast Copper Alloy Service Connector |
| GZ4C38, Mechanical Grounding Connector, Copper Cable to Bar | GZ4C38 | Mechanical Grounding Connector, 8 AWG (Str) – 4 AWG (Str), 3/8″ Stud |
| KPB4CG1, Copper Alloy Clip-on, Lay-in Ground Connector | KPB4CG1 | Copper Alloy Clip-on/Lay-in Ground Connector, #10 – #4 CU |
| GBM39W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBM39W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 550 kcmil – 750 kcmil, 5/8″ Stud, Hot Tin Dipped |
| UCG28RS, Parallel Clamp, Aluminum | UCG28RS | Multiple purpose parallel groove clamp made of high strength, high conductivity aluminum alloy. Hardware allows for one of two wrench installation,torque:250 in lbs. |
| UCT26, FASTAP™ Series with LINEMAN ASSIST™ Series, Aluminum Parallel Groove Clamp. Run: Cu/Al 8 Sol-2/0, ACSR 6-2/0; Tap: Cu/Al 6 Sol-2/0, ACSR: 6-2/0 | UCT26 | 2/0 CU FASTAP PGC |
| VG1, Copper Alloy Vise Connector, #6-#10 Sol | VG1 | Cu Alloy Vise Connectors, #6 – #10 Sol |
| GAR1826W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1826W | Ground Clamp Copper Tin Plated bodies and electro tin plated hardware 4 AWG-2/0 AWG Installation Torque Recommended Run in-lb240 LB in |
| GQ291, Copper Ground Connector | GQ291 | Cast Cu Alloy Grounding connectors, 2/0 AWG- 250 kcmil, 6″ L, 2.75″ W |
| C22LH2, Cast Bronze Clamp, Cable to Water Pipe | C22LH2 | Cast Bronze Clamp, Cable to Water Pipe, 2/0 AWG -10 AWG, 1-1/4″ – 2″ Water Pipe, 3/4″ hub |
| UC25A10SLS1, Parallel Tap, Aluminum Clamp | UC25A10SLS1 | Al Clamp, Parallel Tap, 1/0 Al-#10 AWG STR Cu |
| GCS26TN, Ground Clamp to Steel Connector, Tin Plated | GCS26TN | Ground clamp to steel connector, Conductor range from #6 AWG to 2/0 AWG, Tin plated |
| UCT26, FASTAP™ Series with LINEMAN ASSIST™ Series, Aluminum Parallel Groove Clamp. | UCT32 | 400 CU FASTAP PGC |
| GAR1734, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1734 | To Rod or Pipe with the Same Connector. |
| GP6434, Mechanical Grounding Connector, 2 Cables to Rod or Pipe | GP6434 | Mechanical Grounding Connector; 2 Cables to Rod or Pipe |
| KVS31AG12, 2-piece OKLIP Service Connector for heavy duty applications, AL alloy | KVS31AG12 | Cast Al Alloy Mechanical OKLIP, 250 – 350 kcmil Cu/AAC, 4/0 AWG – 336.4 kcmil Al/ACSR(Run), #6 Str. – 350 kcmil Cu/AAC, #6 AWG – 336.4 kcmil Al/ACSR(Tap) |
| C4LH3, Cast Bronze Clamp, Cable to Water Pipe | C4LH3 | Cast Bronze Clamp,Cable to Water Pipe, 3/0 AWG – 10 AWG, 2-1/2″ – 4″ Water Pipe, 1″ hub |
| UC25RS, Aluminum Clamp | UC25RS | Cast Aluminum Alloy TAPIT™, 8 (SOL.) AWG-1/0 (Str.) AL & CU (Groove A), 6 AWG-1/0 AWG ACSR(Groove A), 8 (SOL.) AWG-2 (Str.) AWG AL & CU (Groove B), 6 AWG-1/0 AWG ACSR (Groove B) |
| VG2, Copper Alloy Vise Connector, #4-#8 Str | VG2 | VISE CLAMP 4 STR-8 STR |
| GA25H26, Mechanical Ground Connector for Copper Cable to H-Beam | GA25H26 | Mechanical Ground Connector for Copper Cable to “H” Beam |
| UC2844, Parallel Clamp for Copper, 4/0 Str-1000 kcmil | UC2844 | Parallel clamp for copper, 4/0 STR to 1000 kcmil, 4.25″ L, 3.91″ Height. |
| GAR8634, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR8634 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 kcmil – 500 kcmil, 6″ Pipe, Bright Dipped |
| GAR3909BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3909BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 12″ Pipe, 3/8″ Stud, W/ silicon bronze hardware |
| GL2929CG13, Mechanical Ground Connector, 2 Copper Cables to Bar | GL2929CG13 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| UP34R, Heavy Duty Parallel Clamp, Copper or Aluminum | UP34R | Heavy Duty Parallel Clamp |
| GK644C, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK644C | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 8 AWG (Sol.) – 4/0 AWG (Str.), 3/8″ Pipe, 5/8″ – 3/4″ Rod, 3/8″ Stud |
| VG5, Copper Alloy Vise Connector, 2/0 Str-#3 Sol | VG5 | Cu Alloy Vise Connectors, 2/0 Str – #3 Sol |
| GAR3908BU, Mechanical Grounding Connector, Conductor to Water Pipe | GAR3908BU | Mechanical Grounding Connector, Conductor to Water Pipe, 4-4/0 AWG, 10″ Pipe, 3/8″ Stud, W/ silicon bronze hardware |
| GQ2929, Copper Ground Connector | GQ2929 | Cu Ground Connector, 2/0 AWG Str – 250 Kcmil Cu, 6″ IPS, Cable to Tube |
| GBL30T4, Mechanical Grounding Connector, Cable to Bar | GBL30T4 | Cast Copper Alloy Ground Connector, 4 AWG (SOL) – 300 KCMIL, 1/2″ Stud, 1 1/2″ Width Tin Plated |
| GAR214C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR214C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG -4 AWG, 3-1/2″ Pipe, 3-1/2″-4″ Rod, Bright Dipped |
| GAR1634, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1634 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 – 500 kcmil, #11 Rebar, 1-3 /8″ to 1-1/2″ Rod, 1-1/4″ Pipe, Bright Dipped |
| GQ261, Copper Ground Connector | GQ261 | Cu Ground Connector, #4 – 2/0 AWG Str Cu , above 6″ IPS, Cable to Tube |
| KVS44G4, 2-piece OKLIP Service Connector for heavy duty applications | KVS44G4 | Cast Cu Alloy Service Connector, 500 – 1000 kcmil(Run), 3/0 Str. – 1000 kcmil(Tap) |
| KVS40AS, 2-piece OKLIP Service Connector for heavy duty applications | KVS40AS | Cast Al Alloy Mechanical OKLIP, 400 – 800 kcmil Cu/AAC,338.4 – 715.5 kcmil Al/ACSR(Run), 3/0 Str. – 800 kcmil Cu/AAC, 3/0 AWG – 715.5 kcmil Al/ACSR(Tap) |
| GAR244C, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR244C | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol) – 4 AWG (STR), 5″ Pipe, Bright Dipped. |
| C4LH2, Cast Bronze Clamp, Cable to Water Pipe | C4LH2 | Cast Bronze Clamp, Cable to Water Pipe, 2/0 AWG -10 AWG, 2-1/2″ – 4″ Water Pipe, 3/4″ hub |
| VG4, Copper Alloy Vise Connector, 1/0 Str-#4 Sol | VG4 | Cu Alloy Vise Connectors, 1/0 Str – #4 Sol |
| C6D, Cast Bronze Clamp, Armored Cable to Water Pipe | C6D | Cast Bronze Clamp, Armored Cable to Water Pipe, 10 AWG – 2 AWG (Str.), 1/2″ -1″ Water Pipe |
| GIE4CG4P5, Replacement Vehicle Ground Clamp Cone Point Only, Stainless Steel | GIE4CG4P5 | Replacement Vehicle Ground Clamp Cone Point |
| C22DTN, Cast Bronze Ground Clamp, Cable to Pipe or Tube, Tin Plated | C22DTN | Mechanical Ground Clamp for Rigid Conduit with Strap |
| GA600H30SS, Mechanical Ground Connector for Copper Cable to 6″ Square Fence Post, Stainless Steel | GA600H30SS | Mechanical Ground Connector for Copper Cable to 6″ Square Fence Post |
| GK1826, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1826 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG ( Str.), 2″; 2 3/8″ Pipe, 2″ – 2-3/8 ; 2 7/8″ Rod, 3/8″ Stud |
| GAR1829W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1829W | Ground Clamp Copper Tin Plated bodies and electro tin plated hardware 2/0 AWG-250 Kcmil Installation Torque Recommended Run in-lb240 LB in |
| GZ2958, Mechanical Grounding Connector | GZ2958 | Mechanical Grounding Connector, 3/0 AWG (Str) – 250 kcmil, 5/8″ Stud |
| UC3444, Copper Parallel Groove Clamp, 500-1000 kcmil – Either Groove | UC3444 | CU Parallel Groove Clamp accommodates large number of CU Conductors, Conductor: 500 – 1000 (Either Groove) |
| GAR2134, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR2134 | Mechanical Grounding Connector, Cable to Rod or Pipe, 300 kcmil -500 kcmil, 3-1/2″ Pipe, 3-1/2″-4″ Rod, Bright Dipped |
| LSC5561, AL Lightning Shield Clamp Assembly, 4/0 STR-556 AAC, 5.9 IN L, Galvanized Steel 3/8”-16 Eyebolt, insulation dia:1.34″ | LSC5561 | Cast Al Alloy Lightning Shield Clamp Assembly, 4/0 STR-556 AAC, 5.9 IN L, Galvanized Steel 3/8”-16 Eyebolt, insulation dia:1.34″ |
| UP45R36R, Heavy Duty Parallel Clamp, Copper or Aluminum | UP45R36R | Heavy Duty Parallel Clamp |
| C11JPT, Cast Bronze Clamp, Cable to Water Pipe | C11JPT | Cast Bronze Clamp, Cable to Water Pipe, 10 AWG – 6 AWG, 1/2″ – 1″ Water Pipe, 1/2″ Hub |
| GA800H30SS, Mechanical Ground Connector for Copper Cable to 8″ Square Fence Post, Stainless Steel | GA800H30SS | Mechanical Ground Connector for Copper Cable to 8″ Square Fence Post |
| GB29T8HEX, Mechanical Grounding Connector, Cable to Bar | GB29T8HEX | Mechanical Grounding Connector, Cable to 1/4″ – 1″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud |
| GAR8626W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR8626W | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)- 2/0 AWG (Str), 6″ Pipe, Tin Hot Dipped |
| GK1829CG1, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1829CG1 | Mechanical Ground Connector; 3 Copper Cables to Rod or Pipe |
| GAR3909TC, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod | GAR3909TC | Mechanical Ground Connector, For 2 Hole Lug to Water Pipe or Rod, 12″ IPS, 3/8″ Bolt |
| UCG32R, Parallel Groove Clamp, Aluminum alloy, Groove A: Al/Cu 1/0 Str-397.5, ACSR: 1/0-336.4; Groove B: Al/Cu 8 Str-2/0 Str, ACSR: 6-1/0, No inhibitor | UCG32R | Multiple purpose parallel groove clamp, high conductivity aluminum alloy |
| GB29G69HEX, Mechanical Grounding Connector, Cable to Bar | GB29G69HEX | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, 1.5 IN Width. |
| GKA25, Ground Connector for Copper | GKA25 | Ground Connector for Copper |
| UCK3UL, Interlocking-finger Parallel Clamp, #6-2 AWG Sol/Str for Both Grooves; Tin-Plated Copper | UCK3UL | Interlocking-finger Parallel Clamp |
| GAR1926TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1926TN | Ground Clamp Copper Tin plated 4 AWG-2/0 AWG Installation Torque Recommended Run in-lb240 LB in |
| GP644C, Mechanical Grounding Connector, 2 Cables to Rod or Pipe | GP644C | Mechanical Grounding Connector, 2 Cables to Rod or Pipe, 8 AWG (Sol.) – 4 AWG (Str.), 3/8″ Pipe, 5/8″ – 3/4″ Rod, 3/8″ Stud |
| GAR8626, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR8626 | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)- 2/0 AWG (Str), 6″ Pipe, Bright Dipped |
| UCK2UL, Interlocking-finger Parallel Clamp, #6 AWG Sol/Str Cu, 1/4″-5/16″ Galvanized Steel Guy Wire, Tin-Plated Copper | UCK2UL | Interlocking-finger Parallel Clamp |
| UCT26RSSS, Aluminum Parallel Groove Clamp featuring LINEMAN ASSIST | UCT26RSSS | BURNDY® FASTAP™ with LINEMAN ASSIST™ Aluminum Parallel Groove Clamp |
| GB29T4W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB29T4W | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, 1.5 IN Width Hot Tin Dipped |
| GBM29T4, Mechanical Grounding Connector, Cable to Bar | GBM29T4 | Mechanical Grounding Connector, Cable to Bar |
| UCG28R25RS, Cast Aluminum Alloy, 4-4/0 AWG ACSR (run), *-1/0 AWG Al (tap) 8-1/0 AWG ACSR (tap) | UCG28R25RS | Cast Aluminum Alloy TAPIT™, 4 AWG-4/0 AWG ACSR (Run), 8 AWG-1/0 AWG AL Cable (Tap), 8 AWG-1/0 AWG ACSR (Tap) |
| GX2626, Mechanical Grounding Connector, Cable Cross Connection | GX2626 | Mechanical Grounding Connector, Cable Cross Connection, 4 AWG (Sol.) – 2/0 AWG (Str.) ( Run), 4 AWG (Sol.) – 2/0 AWG (Str.) ( Tap), 3/8″ Stud |
| GBG28G1, Mechanical Grounding Connector, Cutout Extension | GBG28G1 | Cutout Extension |
| GZ2658T4, Mechanical Grounding Connector, Copper Cable to Bar | GZ2658T4 | Mechanical Grounding Connector, 3 AWG (Str) – 2/0 AWG (Str), 5/8″ Stud, Bar Thickness 1/4″ -1/2″ |
| UC33RS, Cast Aluminum Clamp, Groove A: AL/CU 4/0 Str-400 kcmil ACSR; 3/0-336.4; Groove B: Al/Cu 6 Sol-2/0 Str, ACSR: 6-2/0 with inhibitor | UC33RS | Cast Aluminum Alloy TAPIT™, GROOVE A, AL/CU: 4/0 STR – 400 kcmil ACSR : 3/0 – 336.4 GROOVE B, AL/CU: 6 SOL – 2/0 STR ACSR : 6 – 2/0 W/INHIBITOR |
| GZ6C38, Mechanical Grounding Connector, Copper Cable to Bar | GZ2638 | Mechanical Grounding Connector, For Copper Cable to Bar, 3 AWG (Str) – 2/0 (Str), 3/8″ Stud |
| C22JPT, Cast Bronze Clamp, Cable to Water Pipe | C22JPT | Cast Bronze Clamp, Cable to Water Pipe, 10 AWG – 6 AWG, 1-1/4″ – 2″ Water Pipe, 1/2″ Hub |
| C11JA, Cast Bronze Clamp, Armored Cable to Water Pipe | C11JA | Cast Bronze Clamp, Armored Cable to Water Pipe, 10 AWG – 6 AWG, 1/2″ – 1″ Water Pipe |
| UCG25R2R, Parallel Clamp, Aluminum | UCG25R2R | Parallel Clamp, Cast Aluminum Alloy, 1.19″ L, 1.71″ Height, 1.46″ W |
| GK1926, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1926 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 2-1/2″ Pipe, 2-1/2″ – 2-7/8″ Rod, 3/8″ Stud |
| VP4030, V-Bolt Connector for Flex or Extra Flex Conductor | VP4030 | V-Bolt Connector for Flex or Extra Flex Conductor |
| UCT32RSSS, Aluminum Parallel Groove Clamp featuring LINEMAN ASSIST | UCT32RSSS | BURNDY® FASTAP™ with LINEMAN ASSIST™ Aluminum Parallel Groove Clamp |
| KVS31G14, 2-piece OKLIP Service Connector for heavy duty applications, Run: 250-350 kcmil, TapL #10-250 kcmil | KVS31G14 | Cast Cu Alloy Service Connector, 250 – 350 kcmil(Run), 250 kcmil – #10 Str.(Tap) |
| GAR8629W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR8629W | Mechanical Grounding Connector, Cable to Rod or Pipe, 2 AWG (Sol)- 250 kcmil, 6″ Pipe, Tin Hot Dipped |
| GB26TN, Mechanical Ground Connector, Copper Cable to Bar, Tin Plated | GB26TN | Mechanical Ground Connector; Copper Cable to Bar |
| UW25R, CLIPIT Deadend Clamp, Aluminum Casting | UW25R | CLIPIT deadend clamp. High strength aluminum casting with galvanized steel U-bolt. Holding strength of two deadends exceeds RBS of intended conductor. |
| GK1929, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1929 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Sol.) – 250 kcmil, 2-1/2″ Pipe, 2-1/2″ – 2-7/8″ Rod, 1/2″ Stud |
| GB26T8, Mechanical Grounding Connector, Cable to Bar | GB26T8 | Mechanical Grounding Connector, Cable to 1″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str) |
| GB29G69, Mechanical Grounding Connector, Cable to Bar | GB29G69 | Mechanical Ground Connector |
| UC25R2R, TAPIT Aluminum Clamp | UC25R2R | Cast Aluminum Alloy TAPIT™, 8 (SOL.) AWG-1/0 (Str.) AL & CU (Groove A), 6 AWG-1/0 AWG ACSR(Groove A), 8 (SOL.) AWG-2 (Str.) AWG CU (Groove B), 8 AWG-1 AWG ACSR (Groove B) |
| GKA28, Ground Connector for Copper | GKA28 | Ground Connector for Copper |
| GB39, Mechanical Grounding Connector, Cable to Bar | GB39 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 550 kcmil – 750 kcmil, 5/8″ Stud, 2-3/4 IN Width |
| GIE4CG3P5, Replacement Vehicle Ground Clamp Cone Point Only, Beryllium Copper | GIE4CG3P5 | Replacement Vehicle Ground Clamp Cone Point |
| GAR2226TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2226TN | To Rod or Pipe with the Same Connector. |
| GAR2026TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2026TN | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 3″ Pipe, 3″-3-1/2″ Rod, Tin Plated. |
| GAR2226W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2226W | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol)-2/0 AWG (Str), 4″ Pipe, 4″-4-1/2″ Rod, Tin Hot Dipped. |
| GAR6429TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR6429TN | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3/8″ Pipe, 5/8″-3/4″ Rod, #5-#6 Rebar, Tin Plated. |
| GAR184CW, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR184CW | Ground Clamp Copper Tin Plated bodies and electro tin plated hardware 8 AWG-4 AWG Installation Torque Recommended Run in-lb240 LB in |
| GBM39, Mechanical Grounding Connector, Cable to Bar | GBM39 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 550 kcmil – 750 kcmil, 5/8″ Stud |
| GX3434, Mechanical Grounding Connector, Cable Cross Connection | GX3434 | Cast Cu Alloy Ground Connector, 300 – 500 Kcmil( A ), 300 – 500 Kcmil( AA ), 3/4″ Rod Dia., Bronze H/W |
| KVS34G17, 2-piece OKLIP Service Connector for heavy duty applications | KVS34G17 | Cast Cu Alloy Service Connector, 400 – 500 kcmil(run), #10 str. – 500 kcmil(Tap) |
| UC4W28CONKIT, Parallel Clamp Kit for Copper, includes UC Connector and Cover | UC4W28CONKIT | Parallel Clamp Kit for copper; includes UC Connector and Cover |
| GAR1829TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1829TN | Ground Clamp Copper Tin plated 2/0 AWG-250 Kcmil Installation Torque Recommended Run in-lb240 LB in |
| GAR1826TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1826TN | Ground Clamp Copper Tin plated 4 AWG-2/0 AWG Installation Torque Recommended Run in-lb240 LB in |
| GK1626, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1626 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 1-1/4″ Pipe, 1-3/8″- 1-1/2″ Rod, 3/8″ Stud |
| GKA25SB, Ground Connector for Copper, Silicon Bronze Hardware | GKA25SB | Ground Connector for Copper |
| GX4C4C, Mechanical Grounding Connector, Cable Cross Connection | GX4C4C | Cast Cu Alloy Ground Connector, #8 Sol – #4 Str AWG( A), #8 Sol – #4 Str AWG( AA ), 3/8″ Rod Dia., Bronze H/W |
| GK6429W, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe, Tin Plated | GK6429W | Mechanical Ground Connector; 3 Copper Cables to Rod or Pipe |
| GAR3903TCTNET, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod, Tin Plated | GAR3903TCTNET | Mechanical Water Pipe Ground Connector with Mounting Pad |
| C4JA, Cast Bronze Clamp, Armored Cable to Water Pipe | C4JA | Cast Bronze Clamp, Armored Cable to Water Pipe, 10 AWG – 6 AWG, 2-1/2″ – 4″ Water Pipe |
| GAR2129TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2129TN | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3-1/2″ Pipe, 3-1/2″-4″ Rod, Tin Plated |
| GL2929TN, Mechanical Ground Connector, 2 Copper Cables to Bar, Tin Plated | GL2929TN | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GQ2626, Copper Ground Connector | GQ2626 | Cu Ground Connector, #4 – 2/0 AWG Str Cu , 6″ IPS, Cable to Tube |
| GAR1626TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1626TN | To Rod or Pipe with the Same Connector. |
| UCG28R, Parallel Clamp, Aluminum | UCG28R | Parallel Clamp, Cast Aluminium Alloy, 2.20″ L, 2.75″ Height, 2.20″ W |
| FASTAP™ Series with LINEMAN ASSIST™ Series, Aluminum Parallel Groove Clamp with cover. Run: Cu/Al 8 Sol-2/0, ACSR 6-2/0; Tap: Cu/Al 6 Sol-2/0, ACSR 6-2/0 | UCT26RSC | BURNDY® FASTAP™ with LINEMAN ASSIST™ Aluminum Parallel Groove Clamp |
| GIE4CG3P7, Replacement Vehicle Ground Clamp Cup Point Only, Beryllium Copper | GIE4CG3P7 | Replacement Vehicle Ground Clamp Cup Point |
| GB34TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB34TN | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-1/3 IN Width Tin Plated |
| GKP635, Ground Connector Rod to Cable | GKP635 | Ground Connector |
| GK1529, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1529 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Str.) – 250 kcmil, 1″ Pipe, 1-1/8″ – 1-1/4″ Rod, 1/2″ Stud |
| GZ2912, Mechanical Grounding Connector, Copper Cable to Bar | GZ2912 | Mechanical Grounding Connector, 3/0 AWG (Str) – 250 kcmil, 1/2″ Stud |
| GB4CT4, Mechanical Grounding Connector, Cable to Bar | GB4CT4 | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″ Thick Bar, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Stud; 1-1/4 IN Width. |
| GBM29GS, Mechanical Grounding Connector, Cable to Bar, Galvanized Steel | GBM29GS | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud, Galvanized Steel Hardware |
| GZ2612T4, Mechanical Grounding Connector, Copper Cable to Bar | GZ2612T4 | Ground Connector for Copper Cable to Bar |
| LSC1/01, Lightning Shield Clamp Assembly, AL Lightning Shield Clamp Assembly, 1/0 STR AAC-1/0 ACSR, Galvanized Steel 3/8”-16 Eyebolt | LSC1/01 | Cast Al Alloy Lightning Shield Clamp Assembly, 1/0 STR AAC-1/0 ACSR, 4.5 IN L, Galvanized Steel 3/8”-16 Eyebolt |
| BTCGC1/0SS, Aluminum Ground Tray Clamp, #12 – 1/0 | BTCGC1/0SS | Aluminum ground tray clamp |
| GAR2229TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2229TN | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 4″ Pipe, 4″-4-1/2″ Rod, Tin Plated. |
| GX294C, Mechanical Grounding Connector, Cable Cross Connection | GX294C | Cast Cu Alloy Ground Connector, 2/0 AWG Sol – 250 Kcmil( A), #8 Sol – #4 Str AWG( AA ), 1/2″ Rod Dia., Bronze H/W |
| GAR1726W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1726W | To Rod or Pipe with the Same Connector. |
| BCR02302, Sliding Gate Grounding System | BCR02302 | Sliding Gate Grounding System |
| GK6429TN, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe, Tin Plated | GK6429TN | Mechanical Ground Connector; 3 Copper Cables to Rod or Pipe |
| GK1526, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1526 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 1″ Pipe, 1-1/8″ – 1-1/4″ Rod, 3/8″ Stud |
| GB29WT9, Mechanical Grounding Connector, Cable to Bar | GB29WT9 | Ground Connector |
| GAR1929TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1929TN | Ground Clamp Copper Tin plated 2/0 AWG-250 kcmil Installation Torque Recommended Run in-lb240 LB in |
| GAR1629W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1629W | To Rod or Pipe with the Same Connector. |
| GAR3907TCTNET, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod, Tin Plated | GAR3907TCTNET | Mechanical Water Pipe Ground Connector with Mounting Pad |
| GAR2029TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2029TN | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3″ Pipe, 3″-3-1/2″ Rod, Tin Plated. |
| GAR1629TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1629TN | To Rod or Pipe with the Same Connector. |
| J295, Rail Connector | J295 | Rail Connector |
| GAR1528CG4, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1528CG4 | To Rod or Pipe with the Same Connector. |
| KVS40AG11, 2-piece OKLIP Service Connector for heavy duty applications | KVS40AG11 | Cast Al Alloy Mechanical OKLIP, 400 – 800 kcmil Cu/AAC,338.4 – 715.5 kcmil Al/ACSR(Run), 3/0 Str. – 800 kcmil Cu/AAC, 3/0 AWG – 715.5 kcmil Al/ACSR(Tap) |
| GAR1729TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1729TN | To Rod or Pipe with the Same Connector. |
| GAR194CW, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR194CW | Copper Cable Connection to Rod or Pipe with the Same Connector. |
| GK1729, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1729 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Sol.) – 250 kcmil, 1-1/2″ Pipe, 1-5/8″ – 1-7/8″ Rod, 1/2″ Stud |
| GL2929T4, Mechanical Ground Connector, 2 Copper Cables to Bar | GL2929T4 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GAR1828CG3, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1828CG3 | To Rod or Pipe with the Same Connector. |
| GZ4C58, Mechanical Grounding Connector, Copper Cable to Bar | GZ4C58 | Mechanical Grounding Connector, 8 AWG (Str) – 4 AWG (Str), 5/8″ Stud |
| GBM34T4, Mechanical Grounding Connector, Cable to Bar | GBM34T4 | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud. |
| GBM29TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBM29TN | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 2/0 AWG (Sol) -250 kcmil, 1/2″ Stud. Tin Plated |
| GB4CW, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB4CW | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Stud1-1/4 IN Width. Hot Tin Dipped |
| GXW26C26, GROUNDWEJ Connector, Cable to Cable or Cable to Rod | GXW26C26 | GROUNDWEJ Connector |
| GB26W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB26W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), Tin Plated |
| GAR1728CG1, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1728CG1 | To Rod or Pipe with the Same Connector. |
| C4LH1, Cast Bronze Clamp, Cable to Water Pipe | C4LH1 | Cast Bronze Clamp, Cable to Water Pipe, 10 AWG -6 AWG, 2-1/2″ – 4″ Water Pipe, 1/2″ hub |
| GBM26TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBM26TN | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud. Tin Plated |
| GIE4CG4P7, Replacement Vehicle Ground Clamp Cup Point Only, Stainless Steel | GIE4CG4P7 | Replacement Vehicle Ground Clamp Cup Point |
| C22JA, Cast Bronze Clamp, Armored Cable to Water Pipe | C22JA | Cast Bronze Clamp, Armored Cable to Water Pipe, 10 AWG – 6 AWG, 1-1/4″ – 2″ Water Pipe |
| GL2929CG12, Mechanical Ground Connector, 2 Copper Cables to Bar | GL2929CG12 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GK1629, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1629 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Sol.) – 250 kcmil, 1-1/4″ Pipe, 1-3/8″- 1-1/2″ Rod, 1/2″ Stud |
| GAR2229W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2229W | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 4″ Pipe, 4″-4-1/2″ Rod, Tin Hot Dipped. |
| J279, Rail Connector | J279 | Rail Connector |
| GK2029, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK2029 | Mechanical Ground Connector; 3 Copper Cables to Rod or Pipe |
| GBL30GS, Mechanical Grounding Connector, Cable to Bar, Galvanized Steel | GBL30GS | Cast Copper Alloy Ground Connector, 4 AWG (SOL) – 300 KCMIL, 1/2″ Stud, 1 1/2″ Width Galvanized Steel Hardware |
| GA25H29TN, Mechanical Ground Connector for Copper Cable to H-Beam, Tin Plated | GA25H29TN | Mechanical Ground Connector for Copper Cable to “H” Beam |
| GAR6429W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR6429W | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3/8″ Pipe, 5/8″-3/4″ Rod, #5-#6 Rebar, Tin Hot Dipped. |
| UCG25R2RS, Parallel Clamp, Cast Aluminum Alloy | UCG25R2RS | Parallel Clamp, Cast Aluminum Alloy, 1.19″ L, 1.71″ Height, 1.46″ W |
| GKA28SB, Ground Connector for Copper, Silicon Bronze Hardware | GKA28SB | Ground Connector for Copper |
| GCS2YA26 ground clamp, accepts steel flange 1/8″ to 5/8″; 2/0 AWG Conductor; 2-hole compression lug included | GCS2YA26 | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for 2/0 AWG Conductor |
| GCS2YA3C ground clamp, accepts steel flange 1/8″ to 5/8″; #3 AWG Conductor; 2-hole compression lug included | GCS2YA3C | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for #3 AWG Conductor |
| GCS2YA2C ground clamp, accepts steel flange 1/8″ to 5/8″; #2 AWG Conductor; 2-hole compression lug included | GCS2YA2C | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for #2 AWG Conductor |
| GCS2YA1C ground clamp, accepts steel flange 1/8″ to 5/8″; #1 AWG Conductor; 2-hole compression lug included | GCS2YA1C | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for #1 AWG Conductor |
| GCS2YA25 ground clamp, accepts steel flange 1/8″ to 5/8″; 1/0 AWG Conductor; 2-hole compression lug included | GCS2YA25 | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for 1/0 AWG Conductor |
| GCS2YA6C ground clamp, accepts steel flange 1/8″ to 5/8″; #6 AWG Conductor; 2-hole compression lug included | GCS2YA6C | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for #6 AWG Conductor |
| GCS2YA6C ground clamp, accepts steel flange 1/8″ to 5/8″; #6 AWG Conductor; 2-hole compression lug included | GCS2YA8C | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for #8 AWG Conductor |
| GCS2YA4C ground clamp, accepts steel flange 1/8″ to 5/8″; #4 AWG Conductor; 2-hole compression lug included | GCS2YA4C | GCS2YA connector accommodates steel 1/8″ to 5/8″ thick; includes a 2-hole compression lug for #4 AWG Conductor |
| 115-1000A, Running Rail Connector, 1000-1250 kcmil Cu, for 115# A.R.E.A. Rail | Running Rail Connector | |
| 150-1000, Contact Rail Connector, 1000 kcmil, 150# NMC Rail | Contact Rail Connector | |
| 115-250-3, Cable Support Rail Clip, 3 Cables, 115# A.R.E.A. Rail | Rail Clip Connector | |
| 900100, Ground Grid Connector, 300-350 kcmil to 4/0 Str-250 kcmil OR 250-250 kcmil | Ground Grid Connector | |
| GCSYA1CWEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; #1 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA1CWEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, for #1 AWG; includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA8CWEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; #8 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA8CWEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA26WEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; 2/0 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA26WEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA3CWEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; #3 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA3CWEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA6CWEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; #6 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA6CWEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA25WEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; 1/0 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA25WEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA4CWEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; #4 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA4CWEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCSYA2CWEEB 1-hole ground clamp, accepts steel flange 1/8″ to 5/8″; #2 AWG Conductor; compression lug and anti-rotation WEEB® Series Washer | GCSYA2CWEEB | GCSYA-WEEB connector accommodates steel 1/8″ to 5/8″ thick, includes compression lug and anti-rotation WEEB® Washer for one-hole applications. |
| GCS34HEX, CONSTRICTOR Mechanical Ground Connector to Steel | GCS34HEX | “The CONSTRICTOR® Mechanical Ground Connector to Steel; 250-500 kcmil Copper; 1/2″ – 1″ Steel” |
| KVS28TN, 2-piece OKLIP Service Connector for heavy duty applications, Run: 1/0-4/0 Str, Tap: #10-4/0 Str, Tin Plated | KVS28TN | Cast Cu Alloy Service Connector, 1/0 – 4/0 Str. (Run), #10 – 4/0 Str.(Tap), Tin Plated |
| KVS28G7, 2-piece OKLIP Service Connector for heavy duty applications, Run: 1/0-4/0 Str, Tap: #10 Str-4/0 Str | KVS28G7 | Cast Cu Alloy Service Connector, 1/0 – 4/0 Str.(Run), #10 Str. – 4/0 Str. (Tap) |
| KVS28G6, 2-piece OKLIP Service Connector for heavy duty applications, Run: 1/0-4/0 AWG Str, Tap: #10-4/0 AWG Str | KVS28G6 | Cast Cu Alloy Mechanical Service Connector, 1/0 – 4/0 AWG STR (Run), #10 – 4/0 AWG STR (Tap) |
| KVS26P99, 2-piece OKLIP Service Connector for heavy duty applications | KVS26P99 | 2-piece OKLIP for heavy duty connections |
| UC25A12SLS1, Parallel Tap, Aluminum Clamp | UC25A12SLS1 | Aluminum Clamp, Parallel Tap, 1/0 (Str.) AWG AL to 12 AWG CU |
| UC25A12SLS, Parallel Tap, Aluminum Clamp | UC25A12SLS | Aluminum Clamp, Parallel Tap, 1/0 (Str.) AWG AL to 12 AWG CU |
| UCG32RTNS, Multi-purpose parallel groove clamp | UCG32RTNS | Multi-purpose parallel groove clamp |
| UCG25RA2NS, Parallel Groove Clamp, Groove A and B: Al/Cu 8 Str-1/0 Str, 6-1/0 ACSR, inhibitor included | UCG25RA2NS | Multi-purpose parallel groove clamp |
| KVSU34CG1, Mechanical Connector with Spacer Bar | KVSU34CG1 | Mechanical connector |
| KVS34AG19, 2-piece OKLIP Service Connector for heavy duty applications | KVS34AG19 | Cast Al Alloy Mech OKLIP, 400-500 kcmil Cu/AAC,336.4-397.5 kcmil Al/ACSR(Run), #5 Str.-500 kcmil Cu, #5 Str.-397.5 kcmil Al/ACSR, #4 AWG-500 kcmil AAC(Tap) |
| UC3040, Copper Parallel Groove Clamp, 300-800 kcmil – Either Groove | UC3040 | CU Parallel Groove Clamp accommodates large number of CU Conductors, Conductor: 300 – 800 (Either Groove) |
| UC3040W, Parallel Clamp, Run 300-800 kcmil, Tin Plated | UC3040W | Parallel Clamp |
| UC2834W, Parallel Clamp | UC2834W | Accommodates large range of conductors in either groove. Interlocking finger design provides firm grip with maximum contact length. |
| KVSW44TN, Mechanical Connector with Spacer Bar | KVSW44TN | Mechanical Connector For CUWeld and Copper Supplied with a CU alloy Spacer that seperates run and tap conductors, Run: 500-1000 Kcmil, Tap: 250-1000 Kcmil. |
| GAR3905TCTNET, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod, Tin Plated | GAR3905TCTNET | Mechanical Water Pipe Ground Connector with Pad |
| GAR3904TCTNET, Mechanical Ground Connector, For 2 Hole Lug to Pipe or Rod, Tin Plated | GAR3904TCTNET | Mechanical Water Pipe Ground Connector with Mounting Pad |
| J1250W, Ground Pad Lug | J1250W | GROUND PAD LUG |
| C66, Cast Bronze Clamp, Cable to Water Pipe | C66 | Cast Bronze Clamp, Cable to Water Pipe, 6 AWG ( Sol.), 1-1/4″ – 2″ Water Pipe |
| C22LH1, Cast Bronze Clamp, Cable to Water Pipe | C22LH1 | Cast Bronze Clamp, Cable to Water Pipe, 10 AWG -6 AWG, 1-1/4″ – 2″ Water Pipe, 1/2″ hub |
| C4JPT, Cast Bronze Clamp, Cable to Water Pipe | C4JPT | Cast Bronze Clamp, Cable to Water Pipe, 10 AWG – 6 AWG, 2-1/2″ – 4″ Water Pipe, 1/2″ Hub |
| GAR3904BUW, Mechanical Grounding Connector, Conductor to Water Pipe, Tin Plated | GAR3903BUW | Mechanical Grounding Connector – Conductor to Water Pipe |
| GAR3904BUTN, Mechanical Grounding Connector, Conductor to Water Pipe, Tin Plated | GAR3904BUTN | Mechanical Grounding Connector – Conductor to Water Pipe |
| GAR3903BUTN, Mechanical Grounding Connector, Conductor to Water Pipe, Tin Plated | GAR3903BUTN | Mechanical Grounding Connector – Conductor to Water Pipe |
| GBL30W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBL30W | Cast Copper Alloy Ground Connector |
| GBL30T8, Mechanical Grounding Connector, Cable to Bar | GBL30T8 | Cast Copper Alloy Ground Connector, 4 AWG (SOL) – 300 KCMIL, 1/2″ – 1″ Bar Thickness, 1/2″ Stud, 1 1/2″ Width |
| GBL30STN, Mechanical Grounding Connector, Cable to Bar, Galvanized Steel, Tin Plated | GBL30GSTN | Cast Copper Alloy Ground Connector, 4 AWG (SOL) – 300 KCMIL, 1/2″ Stud, 1 1/2″ Width Galvanized Steel Hardware Tin Plated |
| GA25H26TN, Mechanical Ground Connector for Copper Cable to H-Beam, Tin Plated | GA25H26TN | Mechanical Ground Connector for Copper Cable to “H” Beam |
| GA25H29, Mechancial Ground Connector for Copper Cable to H-Beam | GA25H29 | Mechanical Ground Connector for Copper Cable to “H” Beam |
| GB26T4TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB26T4TN | Mechanical Grounding Connector, Cable to 1/2″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), Tin Plated |
| GZ2612T8, Mechanical Grounding Connector, Copper Cable to Bar | GZ2612T8 | Ground Connector |
| GZ4C58T4, Mechanical Grounding Connector, Copper Cable to Bar | GZ4C58T4 | Mechanical Grounding Connector, 8 AWG (Str) – 4 AWG (Str), 5/8″ Stud, Bar Thickness 1/4″-1/2″ |
| GZ26G6, Mechanical Grounding Connector, Copper Cable to Bar | GZ26G6 | Ground Connector |
| GZ2912T4, Mechanical Grounding Connector, Copper Cable to Bar | GZ2912T4 | Mechanical Grounding Connector, 3/0 AWG (Str) – 250 kcmil, 1/2″ Stud, Bar Thickness 1/4″-1/2″ |
| GZ2612T8W, Mechanical Grounding Connector, Tin Plated, Copper Cable to Bar | GZ2612T8W | Ground Connector for Copper Cable to Bar |
| GZ2958TN, Mechanical Grounding Connector, Tin Plated, Copper Cable to Bar | GZ2958TN | Mechanical Grounding Connector, 3/0 AWG (Str) – 250 kcmil, 5/8″ Stud, Tin Plated |
| GZ4C38T4, Mechanical Grounding Connector, Copper Cable to Bar | GZ4C38T4 | Mechanical Grounding Connector, 8 AWG (Str) – 4 AWG (Str), 3/8″ Stud, Bar Thickness 1/4″-1/2″ |
| GZ2958T8, Mechanical Grounding Connector, Copper Cable to Bar | GZ2958T8 | Mechanical Grounding Connector, 3/0 AWG (Str) – 250 kcmil, 5/8″ Stud, Bar Thickness 1/2″-1″ |
| GL3434T8, Mechanical Ground Connector, 2 Copper Cables to Bar | GL3434T8 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| Mechanical Ground Connector, 2 Copper Cables to Bar | GL3434G1 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GL2929T4TN, Mechanical Ground Connector, 2 Copper Cables to Bar, Tin Plated | GL2929T4TN | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GL2929T6, Mechanical Ground Connector, 2 Copper Cables to Bar | GL2929T6 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GL2626TN, Mechanical Ground Connector, 2 Copper Cables to Bar, Tin Plated | GL2626TN | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GL2929T8, Mechanical Ground Connector, 2 Copper Cables to Bar | GL2929T8 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GL3434T4, Mechanical Ground Connector, 2 Copper Cables to Bar | GL3434T4 | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GL2929T8W, Mechanical Ground Connector, 2 Copper Cables to Bar, Tin Plated | GL2929T8W | Mechanical Ground Connector; 2 Copper Cables to Bar |
| GBM29CG14, Mechanical Grounding Connector, Cable to Bar | GBM29CG14 | Mechanical Ground Connector |
| GBM4CT4, Mechanical Grounding Connector, Cable to Bar | GBM4CT4 | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″, Thick Bar, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Stud. |
| GBM44, Mechanical Grounding Connector, Cable to Bar | GBM44 | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 800 kcmil – 1000 kcmil, 5/8″ Stud |
| GBM26OSB, Mechanical Grounding Connector, Cable to Bar | GBM26OSB | Mechanical Grounding Connector; Cable to Bar |
| GBM26W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GBM26W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud. Hot Tin Dipped |
| GBM26T4, Mechanical Grounding Connector, Cable to Bar | GBM26T4 | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud. |
| GBM4CT8, Mechanical Grounding Connector, Cable to Bar | GBM4CT8 | Mechanical Grounding Connector, Cable to 1/2″ – 1″, Thick Bar, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Stud. |
| GB34T10W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB34T10W | Mechanical Grounding Connector, Cable to 1/4″ – 1 1/4″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-3/8 IN Width Hot Tin Dipped |
| GB44T10W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB44T10W | Mechanical Grounding Connector, Cable to 1/4″ – 1 1/4″ Thick Bar, 800 kcmil – 1000 kcmil, 5/8″ Stud, 3-1/6 IN Width Hot Tin Dipped |
| GB26OSB, Mechanical Grounding Connector, Cable to Bar | GB26OSB | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud |
| GB34T8TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB34T8TN | Mechanical Grounding Connector, Cable to 1/4″ – 1″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-1/3 IN Width Tin Plated |
| GB34T8, Mechanical Grounding Connector, Cable to Bar | GB34T8 | Mechanical Grounding Connector, Cable to 1/4″ – 1″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-1/3 IN Width |
| GB34T4W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB34T4W | Mechanical Grounding Connector, Cable to 1/4″ – 1/2″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-1/3 IN Width Hot Tin Dipped |
| GB34W, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB34W | Mechanical Grounding Connector, Cable to 1/4″ Thick Bar, 300 kcmil – 500 kcmil, 1/2″ Stud, 2-1/3 IN Width Hot Tin Dipped |
| GB26T4GS, Mechanical Grounding Connector, Cable to Bar, Galvanized Steel | GB26T4GS | Mechanical Grounding Connector, Cable to 1/2″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), Hardware: Galvanized Steel |
| GB29CG40, Mechanical Grounding Connector, Cable to Bar | GB29CG40 | Mechanical Ground Connector |
| GBG28G2, Mechanical Grounding Connector, Cutout Extension | GBG28G2 | Copper Ground Connector CU CABLE: 8 AWG (SOL) – 4 AWG (STR) 5/16″ Stud |
| GXW6C58, GROUNDWEJ Connector, Cable to Rod | GXW6C58 | GROUNDWEJ Connector |
| GXW34C34, GROUNDWEJ Connector, Cable to Cable | GXW34C34 | GROUNDWEJ Connector |
| GXW34C31, GROUNDWEJ Connector, Cable to Cable | GXW34C31 | GROUNDWEJ Connector |
| GXW34C26, GROUNDWEJ Connector, Cable to Cable | GXW34C26 | GROUNDWEJ Connector |
| GXW2C25, GROUNDWEJ Connector, Cable to Cable | GXW2C25 | GROUNDWEJ Connector |
| GXW2C2, GROUNDWEJ Connector, Cable to Cable | GXW2C2 | GROUNDWEJ Connector |
| GXW34C58, GROUNDWEJ Connector, Cable to Cable | GXW34C58 | GROUNDWEJ Connector |
| GXW2C58, GROUNDWEJ Connector, Cable to Cable or Cable to Rod | GXW2C58 | GROUNDWEJ Connector |
| GQ291W, Copper Ground Connector, Tin Plated | GQ291W | Cu Ground Connector, 2/0 AWG Str – 250 Kcmil Cu, above 6″ IPS, Cable to Tube, Tin plated |
| GXW26C58, GROUNDWEJ Connector, Cable to Cable or Cable to Rod | GXW26C58 | GROUNDWEJ Connector |
| GK2229, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK2229 | Mechanical Grounding Connector, 3 Cables to Rod or Pipe, 2/0 AWG (Sol.) – 250 kcmil, 4″ Pipe, 4″ – 4-1/2″ Rod, 1/2″ Stud |
| GK1926W, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe, Tin Plated | GK1926W | Mechanical Ground Connector; 3 Copper Cables to Rod or Pipe |
| GK1129, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK1129 | Cast Cu Alloy Grounding Clamp, 3 Cables to Rod or Pipe, 1/2″ Rod Dia, 1/4″ IPS(A), 2/0 AWG Sol – 250 Kcmil Cu(AA) |
| GK2129, Copper Alloy Grounding Clamp, 3 Cables to Rod or Pipe | GK2129 | Mechanical Ground Connector; 3 Copper Cables to Rod or Pipe |
| GD6776CG1, Mechanical Groud Connector | GD6776CG1 | Mechanical Ground Connector |
| GAR6426TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR6426TN | Mechanical Grounding Connector, 4SOL – 2/0STR PIPE SIZE: 3/8″ IPS ROD SIZE: 5/8″ – 3/4″ Tin Plated |
| GAR1829G1TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1829G1TN | Ground Clamp Copper Tin plated 2/0 AWG-250 Kcmil Installation Torque Recommended Run in-lb240 LB in |
| GAR1626G1TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1626G1TN | Mechanical Grounding Connector |
| GAR3905TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR3905TN | Mechanical Grounding Connector |
| GAR6426SE, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR6426SE | Mechanical Grounding Connector, 4 SOL – 2/0 STR; PIPE SIZE: 3/8″ IPS; ROD SIZE: 5/8″ – 3/4″ with split lock washers; Direct Burial |
| GAR3906BUTN, Mechanical Grounding Connector, Tin Plated | GAR3906BUTN | ACTUAL O.D.: 6.62 in. [168] 4 Str (.232) – 4/0 Str (.528) AWG 25mm2 Str [6.6] – 95mm2 str [12.0] TQ: 200 lb-in [22.5 Nm] Tin Plated |
| GAR1834TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1834TN | Ground Clamp Copper Tin plated 300 kcmil-500 kcmil Installation Torque Recommended Run in-lb480 LB in |
| GAR2126TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2126TN | Mechanical Grounding Connector, Cable to Rod or Pipe, 4 AWG (Sol.) – 2/0 AWG (Str.), 3-1/2″ to 4″ Rod, 3-1/2″ Pipe, Tin Plated. |
| GAR1428CG1, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1428CG1 | Mechanical Ground Connector |
| GAR644CW, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR644CW | Mechanical Grounding Connector, Cable to Rod or Pipe, 8 AWG (Sol)- 4 AWG (Str), 3/8″ Pipe, 5/8″-3/4″ Rod, #5-#6 Rebar, Tin Hot Dipped. |
| GAR1426SE, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1426SE | To Rod or Pipe with the Same Connector. |
| GAR174CW, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR174CW | Ground Clamp Copper Tin Plated bodies and electro tin plated hardware 8 AWG-4 AWG Installation Torque Recommended Run in-lb240 LB in |
| GAR2029W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2029W | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3″ Pipe, 3″-3-1/2″ Rod, Tin Plated. |
| GAR1426W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1426W | To Rod or Pipe with the Same Connector. |
| GAR1729W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1729W | To Rod or Pipe with the Same Connector. |
| GAR1529W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1529W | To Rod or Pipe with the Same Connector. |
| GAR1526W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1526W | To Rod or Pipe with the Same Connector. |
| GAR1929W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1929W | Ground Clamp Copper Tin Plated bodies and electro tin plated hardware 2/0 AWG-250 kcmil Installation Torque Recommended Run in-lb240 LB in |
| GAR2129W, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR2129W | Mechanical Grounding Connector, Cable to Rod or Pipe, 2/0 AWG (Sol) -250 kcmil, 3-1/2″ Pipe, 3-1/2″-4″ Rod, Tin Hot Dipped |
| GAR1726TN, Mechanical Grounding Connector, Cable to Rod or Pipe, Tin Plated | GAR1726TN | To Rod or Pipe with the Same Connector. |
| GAR1526SE, Mechanical Grounding Connector, Cable to Rod or Pipe | GAR1526SE | To Rod or Pipe with the Same Connector. |
| GCB63T13G1SS, Bronze Ground Connector for Static Grounding Applications, Stainless Steel Hardware | GCB63T13G1SS | Ground Connector |
| UW2R, Parallel Groove Clamp, Aluminum Casting | UW2R | Parallel Groove Clamp with V-Bolts |
| LSC556, Lightning Shield Clamp Assembly, AL Lightning Shield Clamp Assembly, 4/0 STR-556 AAC, Galvanized Steel 3/8”-16 Eyebolt, insulation dia:1.16″ | LSC556 | Cast Al Alloy Lightning Shield Clamp Assembly, 4/0 STR-556 AAC, 5.9 IN L, Galvanized Steel 3/8”-16 Eyebolt, insulation dia:1.16″ |
| VP4440, V-Bolt Connector for Flex or Extra Flex Conductor | VP4440 | V-Bolt Connector for Flex or Extra Flex Conductor |
| VP2828, V-Bolt Connector for Flex or Extra Flex Conductor | VP2828 | V-Bolt Connector for Flex or Extra Flex Conductor |
| VP3430, V-Bolt Connector for Flex or Extra Flex Conductor | VP3430 | V-Bolt Connector for Flex or Extra Flex Conductor |
| GCS29HEX, CONSTRICTOR Ground Clamp to Steel Connector | GCS29HEX | The CONSTRICTOR® Mechanical Ground Connector to Steel; #2 AWG – 250 kcmil; 1/4″ – 1″ Steel |
| BTCGC4SS, Aluminum Ground Tray Clamp, #14-#4 AWG | BTCGC4SS | Aluminum ground tray clamp |
| BTCGC250SS, Aluminum Ground Tray Clamp, #6-250 kcmil | BTCGC250SS | Aluminum ground tray clamp |
| BCR06302, Sliding Gate Grounding System | BCR06302 | Sliding Gate Grounding System |
| BCR03302, Sliding Gate Ground System | BCR03302 | Sliding Gate Grounding System |
| BCR05302, Sliding Gate Grounding System | BCR05302 | Sliding Gate Grounding System |
| GBM26T8, Mechanical Grounding Connector, Cable to Bar | GBM26T8 | Mechanical Grounding Connector, Cable to 1/4″ – 1″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), 3/8″ Stud. |
| GB29T8TN, Mechanical Grounding Connector, Cable to Bar, Tin Plated | GB29T8TN | Ground Connector |
| GB26T4GSTN, Mechanical Grounding Connector, Cable to Bar, Galvanized Steel, Tin Plated | GB26T4GSTN | Mechanical Grounding Connector, Cable to 1/2″ Thick Bar, 4 AWG (Sol)-2/0 AWG (Str), Hardware: Galvanized Steel, Tin Plated |
| 250400, Rail Bonding Connector, 1/0-500 kcmil, Type A | 250400 | Rail Bonding Connector |
| 900105, Ground Grid Connector | 900105 | Ground Grid Connector |
| 747007, Cable Support Spring Rail Clip | 747007 | Cable Support Spring Rail Clip |
| 22000, Pothead Connector for 2000 kcmil | 22000 | Pothead Connector |
| 150-2-500, Contact Rail Connector | 150-2-500 | Contact Rail Connector |
| 150-2000, Contact Rail Connector | 150-2000 | Contact Rail Connector |
| 115-500A, Running Rail Connector | 115-500A | Running Rail Connector |
| 115-250N, Cable Rail Clip | 115-250N | Cable Rail Clip |
| 115-2-500, Contact Rail Connector, #2-500 kcmil Cu, 115 & 119# A.R.E.A. Rail | 115-2-500 | Contact Rail Connector |
| 115-250-2S, Cable Support Spring Rail Clip, 2 Cables, 115# A.R.E.A. Rail with Zinc Kept Nuts | 115-250-2S | Cable Support Spring Rail Clip |
| 115-1000B, Bent Running Rail Connector | 115-1000B | Bent Running Rail Connector |
| 115-1000A, Running Rail Connector | 115-1000A | Running Rail Connector |
| 900101, Ground Grid Connector | 900101 | Ground Grid Connector |
| 900104, Ground Grid Connector | 900104 | Ground Grid Connector |
| 900100, Ground Grid Connector | 900100 | Ground Grid Connector |
| 900102, Ground Grid Connector | 900102 | 900102 G.G. connector |
| GNAH292N, Mechanical Grounding Terminal, Cable to Flat, NEMA-drilled pad, IEEE 837 | GNAH292N | Mechanical Grounding Connector, Cable to Equipment or Structure, #6 AWG SOL – 250 kcmil, 1/2″-13 Hardware with 1.75” NEMA spacing, IEEE 837 |
| GBH26, Mechanical Grounding Connector, Cable to Flat, IEEE 837 | GBH26 | Mechanical Grounding Connector, One Cable to Tower Leg, Equipment or Structure, #4 AWG SOL – 2/0 AWG STR, 1/2″-13 Hardware, IEEE 837 |